OPTAPIX AC 95

Binders

  • Chemical Basis Aqueous polymer dispersion
  • Appearance white liquid
  • Active Matter approx. 50 %
  • Solubility water-miscible
  • Viscosity approx. 2800mPas
  • Residue of Ignition max. 0.5%
  • Packaging 30kg
中文版 English

Product Details

Application

OPTAPIX AC 95 brings about an increase in the green and dry breaking strength and increases the edge strength. An adequate degree of these strengths is necessary for the handling properties of the shaped components in further technological processes and for transport within the plant.
OPTAPIX AC 95 can be used during plastic moulding with the extrusion press, in dry pressing, and during the manufacture of spray and build-up granules.
Owing to its good general slip compatibility, this additive is particularly suitable for the preparation of ceramic bodies by spray granulation followed by isostatic pressing.It is often possible to reduce the moulding pressure and to retain the same degree of compaction.
The mode of action of OPTAPIX AC 95 depends on the creation of adhesive forces between the raw material particles. A suitable binder-water ratio allows the formation of a film which attaches itself to the raw material particles.
The amount added is between 1.0 and 2.0 % of the solids content of the body or slip.

Shelf-life / Packaging

12 months under proper conditions (+ 2 °C to 30 °C), keep tightly sealed

drums of 30 and 130 kg, containers of 1000 kg

The information above is based on our factory and laboratory test results. In actual application, due to changes in usage conditions, the information above is provided as a reference only, and we do not assume any responsibility for any resulting consequences. We require users to respect the rights of third parties.
Back