PRODUKT KP 9128

Pressing Agents And Lubricants

  • Chemical Basis Fatty acid preparation with non-ionic emulsifier
  • Appearance yellow liquid
  • Active Matter approx. 100 %
  • Solubility emulsifiable with water
  • Viscosity approx. 50 mPas
  • Residue of Ignition max. 0.1 %
  • Packaging 25 kg
中文版 English

Product Details

Application

PRODUKT KP 9128 is an alkali-free pressing agent that makes it possible to compact dry press bodies uniformly and increases the density in most cases. The additive acts as a pressure-equalizing agent by the formation of lubricating layers within the body, thus facilitating flow under pressure. The formation of a lubricating layer between the body and the mould wall also reduces the frictional forces set up there, and thus contributes to a reduction in wear and tear.

It can be incorporated into extrusion bodies, as a lubricant to reduce friction on the press cylinder and die.

PRODUKT KP 9128 forms a fine emulsion in water and can be very readily incorporated into the body. The emulsions can have different viscosities, depending on the mixing ratio and the temperature of the water used. If very low viscosity, homogeneous emulsions are preferred, it is recommended to work with water temperatures of > 20 °C with solutions of 1:3 (PRODUKT KP 9128 : water) or higher if required.

The amount added is approx. 0.2 to 1.5 % based on the solids content of the body.

Shelf-life / Packaging

12 months under proper storage conditions (> 18 °C)

drums of 25 and 120 kg, containers of 900 kg

The information above is based on our factory and laboratory test results. In actual application, due to changes in usage conditions, the information above is provided as a reference only, and we do not assume any responsibility for any resulting consequences. We require users to respect the rights of third parties.
Back