GLYDOL 1190

Cleaning Agents

  • Chemical Basis Polycarboxylate with anionic tensides
  • Appearance amber liquid
  • pH approx. 9.5
  • Solubility water-soluble
  • Packaging 30 kg
中文版 English

Product Details

Application

GLYDOL 1190 is an environment-friendly product which is used for cleaning pressure casting resin moulds (water hazard class 1).
The mode of action of GLYDOL 1190 depends on the fact that its wetting properties loosen deposits, and its complexing properties allow it to rinse out multivalent cations, e. g. calcium, magnesium or aluminium.
With GLYDOL 1190 it is possible to clean the mould pores and capillaries, and/or the mould surface. For cleaning the mould pores, a 1.5 – 3.0 % solution is produced by mixing GLYDOL 1190 with water. This solution can be introduced into the mould channels or capillaries by water pressure or vacuum. For cleaning the mould surface, GLYDOL 1190 can be applied to the mould undiluted or diluted with water in the ratio 1:1.
After a certain contact time, which depends on the degree of soiling or clogging, the mould should be rinsed through several times with water followed by air. During its contact time, the mould must be kept humid. For this purpose it should be closed.
In order to prevent rapid ageing of the moulds, they should be cleaned with GLYDOL 1190 even from the very beginning. We recommend cleaning the moulds before a machine stop, and at least once during each working shift.

Shelf-life / Packaging

12 months under proper conditions

drums of 30 kg and 140 kg

The information above is based on our factory and laboratory test results. In actual application, due to changes in usage conditions, the information above is provided as a reference only, and we do not assume any responsibility for any resulting consequences. We require users to respect the rights of third parties.
Back