OPTAPIX AC 112

Binders

  • Chemical Basis Aqueous polymer dispersion
  • Appearance white liquid
  • Active Matter approx. 60 %
  • Solubility water-miscible
  • Viscosity approx. 2500 mPas
  • Packaging 25kg
中文版 English

Product Details

Application

OPTAPIX AC 112 brings about an increase in the green and dry breaking strength. Increases up to 100 % are possible.

OPTAPIX AC 112 can be used for conventional casting bodies as well as for pressure casting bodies used in tableware, sanitary ware and technical ceramic applications.

OPTAPIX AC 112 is generally compatible with ceramic slurries and should therefore be added to the slurry before spray drying.

Bodies prepared with OPTAPIX AC 112 show an even and rapid drying behaviour. Cracking due to different shrinkage in the mould is avoided and the dewatering times in the mould are shorter.

On account of the body’s homogeneity and the high plasticity of the cast pieces, they can be demoulded earlier. However, they are characterized by a good strength. Hollow casting bodies show a good outflow behaviour; streaks are to a large extent prevented.

Bodies prepared with OPTAPIX AC 112 are, in general, characterized by stable rheology.

The amount to be added varies between 0.05 and 4.0 % related to the solids content of the body or slip. The optimum addition quantity must be determined in your own trials.

Shelf-life / Packaging

6 months under proper storage conditions (+2°C to +30°C)

Drums of 25 kg, containers of 1000 kg

OPTAPIX AC 112 Additive for slip casting
OPTAPIX AC 112 Additive for slip casting

The information above is based on our factory and laboratory test results. In actual application, due to changes in usage conditions, the information above is provided as a reference only, and we do not assume any responsibility for any resulting consequences. We require users to respect the rights of third parties.
Back